Upgrade kit for the GO010 Universal Hub Puller and Drive Shaft Set
Use this kit if the profile of the seat of the drive shaft's spline has a high degree of adjustment with respect to the profile of the seat of the hub's spline.
- The adapters in this kit can be used both on drive shafts secured with nuts (of commercial use) and those secured with bolts (VW/Audi for example).
- This set is also suitable for fitting the hub.
Applications:
VW/Audi/Seat/Skoda/BMW/Mercedes/Opel/Renault/Peugeot/Porsche (Cayenne) etc.
Contents:
- 10 x pieces for traction sockets for outer thread drive shaft, M16 x 1.5 / M18 x 1.5 / M20 x 1.0 / M20 x 1.25 / M20 x 1.5 / M20 x1.0 / M22 x 1.5 / M24 x 1.5 / M27 x 1.5 / M30 x 1.5
- 2 x pieces for tie rods for inner thread-drive shaft, M14 x 1.5 / M16 x 1.5
- 1 x piece for adaptor-fitting M12 x 1.25 / M16 x 1.5
- 1 x piece for thrust screw M16 / M12, L=300 mm
- 1 x piece for bell-hub support, 1-1/2"x16 G
- 1 x piece for support bushing with thrust bearing
- 1 x piece for nut-traction M16
- 2 x pieces for adaptors to remove the joints from the drive shaft