Heating

The Deluxe kit includes a removable tray with eleven labelled coils; including nine interchangeable pre-formed coils to heat fasteners up to 1 1/2" in diameter and are a variety of lengths from 4“ - 10" long, the flexible Bearing Buddy for wrapping around inline and asymmetrical objects and the straight heat resistant U-Form coil for DIY winding Generates Invisible Heat® to release corroded and thread locked metal components without the danger of an open flame 1 KILOWATT INPUT - 1 KILOWATT OUTPUTFeatures include:Angled Design with Trigger: Lightweight, ergonomic design allows for induction heat to access hard to reach places more easilyCoil Twist Lock: Coils now lock down with one simple turn (no more thumb screws)LED Usage Indicator: A red LED will light under fault conditions and green LED lights while the trigger is active and the tool is heating properlyFault Override Delay: Any event that causes the red LED to illuminate will protect the tool by starting a three second lock outFan Operation Enhancements: The fan continues to run after the trigger is released to aid in thermal cycle time reduction and will stay powered when the thermal switch opens to aid in cooling the toolUser Controlled LED Switch: As long as the tool is powered and the internal power supply is operating, the LED will remain lit when the switch is onThree Year Limited Warranty Applications include: ABS SensorsBrake Bleeder NutsExhaust SystemFuel Tank StrapsHeat TreatingInline ConnectorsMetal FabricationO2 / DPF SensorsTruck Bed BoltsBody Panel DentsTie Rod / Ball Joint EndsSuspension ComponentsSteering ComponentsU-Bolts

Read more less

INTRODUCING THE NEW.....MINI DUCTOR VENOM HANDHELD INDUCTION HEATER - WITH 3 YEAR WARRANTYGenerates Invisible Heat® to release corroded and thread locked metal components without the danger of an open flame1 KILOWATT INPUT - 1 KILOWATT OUTPUTFeatures include:Angled Design with Trigger: Lightweight, ergonomic design allows for induction heat to access hard to reach places more easilyCoil Twist Lock: Coils now lock down with one simple turn (no more thumb screws)LED Usage Indicator: A red LED will light under fault conditions and green LED lights while the trigger is active and the tool is heating properlyFault Override Delay: Any event that causes the red LED to illuminate will protect the tool by starting a three second lock outFan Operation Enhancements: The fan continues to run after the trigger is released to aid in thermal cycle time reduction and will stay powered when the thermal switch opens to aid in cooling the toolUser Controlled LED Switch: As long as the tool is powered and the internal power supply is operating, the LED will remain lit when the switch is onThree Year Limited WarrantyIncludes 3pc Coil Kit; 1 x Coil 1 x String 1 x Bearing Buddy   ‹Applications include: ABS Sensors Brake Bleeder Nuts Exhaust System Fuel Tank Straps Heat Treating Inline Connectors Metal Fabrication O2 / DPF Sensors Truck Bed Bolts Body Panel Dents Tie Rod / Ball Joint Ends Suspension Components Steering Components U-Bolts

Read more less

All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS - expanding the metal which allows for fast and easy release.  12V / 70amp / 840watt Completely portable - works with any 12v battery pack or 12v battery Bright led lamp illuminates work surface Durable reinforced thermal plastic housing with slip resistant grenade style grip Thermal overload protection Reverse polarity protection Over voltage protection Includes 3 x coil attachments  

Read more less

New 110 Volt version designed with site work in mind, where only 110 Volt power is permitted.All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS -expanding the metal which allows for fast and easy release. Provides safe and near instant heat for site work, construction and factory maintenance users, providing a small, fast and flexible tool in place of open flame options when heating components Time saving tool ideal for use in all environments and makes the completion of on-site risk assessments far easier Includes features as per SP Induction Heater + Specifically designed for the UK/EU: 110v/6 amp/1000 watt with full CE certification Includes rope, u-form & pre-formed coil

Read more less

The SP Induction Heater + is a redesign and upgrade of the popular Mini-Ductor II® and uses new engineering technology for increased energy efficiency and ease of use.Now you can use the power of technology with a flameless heat to quickly release corroded or seized components and other metallic parts.All without the damage normally associated with gas torches. Heats in seconds!All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS - expanding the metal which allows for fast and easy releaseKey features of the SP Induction Heater + Operates cooler for better efficiency, handling and product longevity Long operating cycle time Carry Case; with storage for all attachments, fits in tool chests for security Integrated CE filter improves handling of product Specifically designed for the UK/EU: 230v/6 amp/1000 watt “ with full CE certification LED work light illuminates work area 1 year warranty - Parts/Labour A true 1,000 watts max output power available Kit includes rope, u-form and pre-formed coil

Read more less

Highly adaptable coil allows user to shape to suit Use three / four windings of coil for maximum performance 41 Inches length

Read more less

Set of three highly adaptable coil allows user to shape to suit Use three / four windings of coil for maximum performance 41 Inches length

Read more less

Contains 3 x popular sizes of interchangeable coils 19mm, 21mm, 26mm

Read more less

Contains 8 x popular sizes of interchangeable coils Length 19mm, 22mm x 2, 26mm, 32mm, 38mm, 45mm, 

Read more less

The Thin Wall Coil Pack offers four of the most popular sized coils for your induction heater. The kit enables you to heat and release seized nuts, bolts and other metallic hardware from corrosion and threadlock compounds. The kit is a collection of our most popular sized coils and are manufactured in an assortment of lengths and sizes to fit a variety of applications. Benefits:Includes 4 of the most used coils of varying lengths for removing stuck fastenersFaster and safer than a torchEach coil lasts for several hundred uses or more subject to use “ the use of the proper sized coils per application, avoiding abrasion and overheating prevents premature wear to the coilCoil insulation is coated to resist abrasion but, if insulation is breached, a new coil will need to be usedThe coils are all flexible and can be bent or separated for a variety of applicationsTo use around corners or buried deep near plastic or rubber, simply bend to your desired configuration. Kit Contents: 19mm Thin Wall Coil  21mm Thin Wall Coil  22mm Thin Wall Coil  25mm Thin Wall Coil  Compact Storage Tube

Read more less

The Essential Coil Kit is a collection of essential coils for your induction heater. The kit enables you to heat and release seized nuts, bolts and other metallic hardware from corrosion and threadlock compounds. The Essential Coil Kit is a collection of our most-used smaller diameter coils and are manufactured in an assortment of lengths and sizes to fit a variety of applications.Benefits:Includes 8 of the most used smaller diameter coils of varying lengths for removing stuck fastenersFaster and safer than a torchEach coil lasts for several hundred uses or more subject to use “ the use of the proper sized coils per application, avoidingabrasion and overheating prevents premature wear to the coilCoil insulation is coated to resist abrasion but, if insulation is breached, a new coil will need to be usedThe coils are all flexible and can be bent or separated for a variety of applicationsTo use around corners or buried deep near plastic or rubber, simply bend to your desired configuration. Kit Contents: Two 22mm pre-formed coils (L127mm x W32mm) Two 19mm pre-formed coils (L114mm x W32mm) One 22mm long pre-formed coil (L241mm x W32mm) One 25mm pre-formed coil (L210mm x W44mm) One 22mm long pre-formed coil (LCK) (L337mm x W32mm) One 25mm long pre-formed coil (L337mm x W44mm) One storage tube

Read more less

8 Extra Long Preformed Coils Length 330mm Sizes: 19mm, 22mm x 2, 26mm x 2, 32mm, 38mm, 45mm

Read more less

For use with your induction heater. The heat pad aids in the removal of decals, graphics, stripes, emblems and body mouldings etc. by softening the adhesive to make removal simple & effective

Read more less

The heat resistant mat helps extend the life of rope coils by preventing abrasion and overheating of the coil. 152 x 305mm.

Read more less

Warm up time: 35min Runtime: 35 min Lithium Battery = 500-700 charge cycles Can also be used whilst connected to mains 30W: high power for a small device and no current risk Does not require gas - no danger of flame and cost saving Cordless operation for ease of use Precision tip for fine solders (connectors, etc.) Universal tip for soldering cables (e.g: cabling a trailer hitch) Tip for heat-shrink sheaths: Does not come into contact with the sheath so no risk of melting Heats up in 10 - 15 seconds Housing remains at safe working temperature  Equipment: 30W Soldering Iron Ergonomic and solid case, sliding œstart “ stop button + push button to activate heating LED light 2200 mAh 3.7V rechargeable lithium-ion battery supply  Accessories Included:  3 x ¼-turn tips: Universal tip, fine-pointed tip and tip for heat-shrink sheath Micro-USB charging cable Iron rest Ø 1.0mm wire Cleaning sponge Thermal protective cap and circuit breaker

Read more less

45mm coil Length 330mm For use with Induction Heater / Venom

Read more less

38mm coil Length 330mm For use with Induction Heater / Venom

Read more less

32mm coil Length 330mm For use with Induction Heater / Venom

Read more less

26mm coil Length 330mm For use with Induction Heater / Venom

Read more less

22mm coil Length 330mm For use with Inuction Heater / Venom

Read more less

19mm Coil Length 330mm For use with Induction Heater / Venom

Read more less

45mm Coil Length 200mm For use with Induction Heater / Venom

Read more less

38mm Coil Length 200mm For use with Induction Heater / Venom

Read more less

32mm Coil Length 200mm For use with Induction Heater / Venom

Read more less

26mm coil Length 200mm For use with Induction Heater / Venom

Read more less

22mm coil Length 200mm For use with Indcution Heater / Venom

Read more less

19mm coil  Length 200mm For use with Induction Heater / Venom

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts  Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Electronic safety protection Level heating temperature setting Easy to use 5" colour touch control panel Inductor cable 4.5M Ready to use with tip  Technical data Input power 18 KW-32 A, electrical connection IEC60309 INVERTER generator Voltage 400V 3PH+T 50 Frequency level 15-30khz 8 m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Release of highly corroded or seized bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Electronic safety protection Level heating temperature setting Easy to use 5" colour touch control panel Inductor cable 4.25M Ready to use with tip  Technical data Input power 13 KW-32 A, electrical connection IEC60309 INVERTER generator Voltage 400V 3PH+T 50 Frequency level 15-30khz 8 m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Electronic safety protection Easy to use 5" colour touch control panel Inductor cable 3M Ready to use with tip  Technical data Input power 8 KW-16 A, electrical connection IEC60309 INVERTER generator Voltage 230V 3PH+T 50 Frequency level 15-30khz 8 m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Power level setting (KW) Keyboard Inductor cable 3M Ready to use with tip  Technical data Input power 5 KW-16 A, electrical connection IEC60309 Voltage 400V 3PH+T 50 Frequency level 15-30khz Work cycle 30 min* (*± 5% ambient temperature maximum power) 8 m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Suspension, shock absorbers & mufflers removal Bending Crankshaft straightening  Advantages: Compact dimensions Power level setting (KW) Keyboard Inductor cable 2M Ready to use with tip  Technical data Input power 3.5 KW-16 A, IEC60309 electrical connection Voltage 230V/1PH - 50/60 Frequency level 15-30khz Duty cycle 5 min* (*± 5% ambient temperature maximum power) 2m of electrical cable Protection fuses 1 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Power level setting (KW) Keyboard Inductor cable 3M Ready to use with tip  Technical data Input power 5 KW-16 A, electrical connection IEC60309 Voltage 220V 1PH+T 50 Frequency level 15-30khz Work cycle 30 min* (*± 5% ambient temperature maximum power) 8m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less